Publications

Tabs

288) Semi-solid processing and its as yet unexplored potential
Aišman, D.; Rubešová, K.; Mašek, B.
Semi-solid processing and its as yet unexplored potential. In Tagungsband zum 18. Werkstofftechnischen Kolloquium in Chemnitz. Chemnitz: 2016. s. 339-346. ISBN: 978-3-00-052212-3 , ISSN: 1439-1597

289) Obtaining a TRIP microstructure by thermomechanical treatment without isothermal holding
Mašek, B.; Jirková, H.; Kučerová, L.
Obtaining a TRIP microstructure by thermomechanical treatment without isothermal holding. In Tagungsband zum 18. Werkstofftechnischen Kolloquium in Chemnitz. Chemnitz: 2016. s. 494-500. ISBN: 978-3-00-052212-3 , ISSN: 1439-1597

290) Influence of Nb Micro-alloying on TRIP Steels Treated by Continuous Cooling Process
Kučerová, L.; Jirková, H.; Mašek, B.
Influence of Nb Micro-alloying on TRIP Steels Treated by Continuous Cooling Process. In 2016.

291) Steel - a Classic Material with a Large Potential for the Future
Mašek, B.; Jirková, H.; Aišman, D.; Jeníček, Š.
Steel - a Classic Material with a Large Potential for the Future. In Tagungsband zum 18. Werkstofftechnischen Kolloquium in Chemnitz. Chemnitz: 2016. s. 45-52. ISBN: 978-3-00-052212-3 , ISSN: 1439-1597

292) Capabilities of Unconventional Processing of Multiphase AHSS Steels
Jirková, H.; Mašek, B.; Štádler, C.; Jeníček, Š.
Capabilities of Unconventional Processing of Multiphase AHSS Steels. In Tagungsband zum 18. Werkstofftechnischen Kolloquium in Chemnitz. Chemnitz: TU Chemnitz, Fakultät für maschinenbau, 2016. s. 362-371. ISBN: 978-3-00-052212-3 , ISSN: 1439-1597

293) Obtaining a TRIP microstructure by thermomechanical treatment without isothermal holding
Mašek, B.; Jirková, H.; Kučerová, L.
Obtaining a TRIP microstructure by thermomechanical treatment without isothermal holding. In 2016.

294) Heat treatment of closed-die forgings-process optimisation using modelling and FEM simulations
Mašek, B.; Vorel, I.; Štádler, C.; Urbánek, M.; Fedorko, M.; Vančura, F.
Heat treatment of closed-die forgings-process optimisation using modelling and FEM simulations. In XXXV. Verformungskundliches Kolloquium. Leoben: Lehrstuhl für Umformtechnik, Leoben, 2016. s. 11-14. ISBN: 978-3-902078-21-6

251) Electron Beam Welding of 42SiCr High-strength steel
Vorel, I.; Čubrová, J.; Jeníček, Š.; Mašekm B.
Electron Beam Welding of 42SiCr High-strength steel. In PROGRAM AND BOOK OF ABSTRACTS. Ljubljana: Institute of Metals and Technology, 2015. s. 251. ISBN: 978-961-92518-8-1

252) Q-P Process in Manufacture of Hollow Products
Mašek, B.; Opatová, K.; Vorel, I.
Process in Manufacture of Hollow Products. In Advanced Materials and Structural Engineering. London: CRC Press, 2015. s. 467-471. ISBN: 978-1-138-02786-2

253) Combination of international high pressure forming and Q-P process for production of hollow products from AHS steel
Mašek, B.; Vorel, I.; Jirková, H.; Kurka, P.
Combination of international high pressure forming and Q-P process for production of hollow products from AHS steel. Advanced Materials Research, 2015, roč. Vol. 1127, č. 2015-10-26, s. 9-15. ISSN: 1662-8985

254) Forming and Microstrukture Development of AHS Steels by Temperature under Ac3
Jirková, H.; Opatová, K.; Jeníček, Š.; Mašek, B.
Forming and Microstrukture Development of AHS Steels by Temperature under Ac3. Advanced Materials Research, 2015, roč. Vol. 1127, č. 2015-10-26, s. 39-47. ISSN: 1662-8985

255) Repeated load response of soil reinforced by two layers of geocell
S. N. Moghaddas Tafreshi; Khalaj, O.; Andrew R. Dawson; Mašek, B.
Repeated load response of soil reinforced by two layers of geocell. Procedia Earth and Planetary Science, 2015, roč. 15, s. 99-104. ISSN: 1878-5220

256) Hot Forming of New Submicron-Structured Alloys with Fe-Al Matrix and Al2O3 Particles
Mašek, B.; Khalaj, O.; Jirková, H.; Svoboda, J.
Forming of New Submicron-Structured Alloys with Fe-Al Matrix and Al2O3 Particles. ISMANAM 2015, 2015, roč. Neuveden, č. 7/2015,

257) Evaluation on Mechanical Behaviour of New ODS Alloys
Khalaj, O.; Mašek, B.; Jirková, H.; Svoboda, J.
Evaluation on Mechanical Behaviour of New ODS Alloys. 2015,

258) Effect of Mini-Thixoforming Parameters on Microstructural Evolution in Low-Alloy Steel
Rubešová, K.; Jirková, H.; Mašek, B.; Vorel, I.
Effect of Mini-Thixoforming Parameters on Microstructural Evolution in Low-Alloy Steel. In DAAAM 2015. Vienna: DAAAM International VIenna, 2015. s. 1-8. ISBN: 978-3-902734-06-8 , ISSN: 2304-1382

259) Effect of Amount of Deformation on Microstructure Evolution During Controlled Cooling of Forgings from Finish-Forging Temperature
Čubrová, J.; Vorel, I.; Vančura, F.; Mašek, B.
Effect of Amount of Deformation on Microstructure Evolution During Controlled Cooling of Forgings from Finish-Forging Temperature. In DAAAM 2015. Vienna: DAAAM International Vienna, 2015. s. 1-5. ISBN: 978-3-902734-06-8 , ISSN: 2304-1382

260) Study of Effects of Forging Temperature and Deformation on Microstructure of Closed-Die-Fogred Steel Part Using Material Technological Modeling
Vančura, F.; Vorel, I.; Mašek, B.
Study of Effects of Forging Temperature and Deformation on Microstructure of Closed-Die-Fogred Steel Part Using Material Technological Modeling. In 23rd International Conference on Materials and Technology. Ljubljana: Copyright © Institute of Metals and Technology, 2015. s. 247. ISBN: 978-961-92518-8-1

261) Stabilization of Retained Austenite in High-Strength Martensitic Steels with Reduced Ms Temperature
Ibrahim, K.; Bublíková, D.; Jirková, H.; Mašek, B.
Stabilization of Retained Austenite in High-Strength Martensitic Steels with Reduced Ms Temperature. In METAL 2015 24th International Conference on Metallurgy and Materials. Ostrava: TANGER spol. s r. o., 2015. s. 1-6. ISBN: 978-80-87294-58-1

262) Material-Technological Modelling of Controlled Cooling of Closed die Forgings from Finish Forging Temperature
Vorel, I.; Vančura, F.; Mašek, B.
Material-Technological Modelling of Controlled Cooling of Closed die Forgings from Finish Forging Temperature. In METAL 2015 24th International Conference on Metallurgy and Materials. Ostrava: © 2015 TANGER Ltd., 2015. s. 1-7. ISBN: 978-80-87294-58-1

263) Comparative Study of Algorithms Used for Automated Evaluation of the Tensile Tests Results
Káňa, J.; Jeníček, Š.; Mašek, B.
Comparative Study of Algorithms Used for Automated Evaluation of the Tensile Tests Results. In METAL 2015 24th International Conference on Metallurgy and Materials. Ostrava: © 2015 TANGER Ltd., 2015. s. 1-5. ISBN: 978-80-87294-58-1

264) Complex shape metallic glass composites produced in one step by mini-thixofoming
Hüsnügül Yilmaz Atay; Aišman, D.; Jirková, H.; Behúlová, M.; Mašek, B.
Complex shape metallic glass composites produced in one step by mini-thixofoming. International Journal of Material Forming, 2015, roč. 2015, č. 8, s. 1-8. ISSN: 1960-6206

265) Material-Technological Modelling of Controlled Cooling of Closed die Forgings from Finish Forging Temperature
Vorel, I.; Vančura, F.; Mašek, B.
Material-Technological Modelling of Controlled Cooling of Closed die Forgings from Finish Forging Temperature. In METAL 2015 24th International Conference on Metallurgy and Materials. Ostrava: © 2015 TANGER Ltd., 2015. s. 202-208. ISBN: 978-80-87294-62-8

266) Production of High Strength Hollow Shafts using Tool Hardening and Q-P Process
Mašek, B.; Vorel, I.; Opatová, K.; Kurka, P.; Hahn, F.; Mahn, U.
Production of High Strength Hollow Shafts using Tool Hardening and Q-P Process. In MATEC Web of Conferences. France: EDP Sciences, 2015. s. 1-6. ISBN: 978-2-7598-1823-5 , ISSN: 2261-236X

267) Opravy svařováním trochu jinak
Mašek, B.
Opravy svařováním trochu jinak. Zváranie, 2015, roč. 7-8, č. 2015, s. 159-160. ISSN: 0044-5525

268) New concept for production of closed die forgings of ultra high strength steels
Mašek, B.; Jirková, H.; Vorel, I.
New concept for production of closed die forgings of ultra high strength steels. In New Developments in Forging Technology. Germany: INVENTUM GmbH, 2015. s. 169-178. ISBN: 978-3-88355-409-9

269) Investigation on new Creep and Oxidation Resistant Materials
Khalaj, O.; Mašek, B.; Jirková, H.; Ronešová, A.; Svoboda, J.
Investigation on new Creep and Oxidation Resistant Materials. Materiali in Technologije, 2015, roč. 49, č. 4, s. 645-651. ISSN: 1580-2949

270) Production of Shaped Semi-products from AHS Steels by Internal Pressure
Vorel, I.; Jirková, H.; Mašek, B.; Kurka, P.
Production of Shaped Semi-products from AHS Steels by Internal Pressure. Materiali in Technologije / Materials and Technology, 2015, roč. 49, č. 5, s. 739-744. ISSN: 1580-2949

271) The Effect of Chromium on Microstructure Development during Q-P Process
Jirková, H.; Kučerová, L.; Mašek, B.
The Effect of Chromium on Microstructure Development during Q-P Process. In Materials Today: Proceedings. Amsterodam: Elsevier Ltd., 2015. s. S627-S630. ISBN: neuvedeno , ISSN: 2214-7853

272) Measuring Material Properties of Metal Foils Using Bulge Test Method
Káňa, J.; Mašek, B.; Rubešová, K.
Measuring Material Properties of Metal Foils Using Bulge Test Method. In DAAAM 2014. Vienna: Procedia Engineering, 2015. s. 861-867. ISBN: neuvedeno , ISSN: 1877-7058

273) Material-technological Modelling of C45 Steel die Forgings
Vorel, I.; Vančura, F.; Pileček, V.; Jirková, H.; Mašek, B.
Material-technological Modelling of C45 Steel die Forgings. In 25th DAAAM International Symposium Intelligent Manufacturing & Automation, 2014. Vienna: Procedia Engineering, 2015. s. 714-721. ISBN: neuvedeno , ISSN: 1877-7058

274) Continuous Cooling of CMnSi TRIP steel
Kučerová, L.; Jirková, H.; Mašek, B.
Continuous Cooling of CMnSi TRIP steel. In Materials Today: Proceedings. Amsterodam: Elsevier Ltd., 2015. s. S677-S680. ISBN: neuvedeno , ISSN: 2214-7853

275) Materiálově-technologické modelování tepelného zpracování výkovků v průběžných pecích
Vorel, I.; Vančura, F.; Fedorko, M.; Mašek, B.
Materiálově-technologické modelování tepelného zpracování výkovků v průběžných pecích. Kovárenství, 2015, roč. 53, č. duben 2015, s. 44-47. ISSN: 1213-9289

276) Effect of Input Structure of Blank on Development of Final Structure when Processing at Temperatures between Solidus and Liquidus
Mašek, B.; Vančura, F.; Aišman, D.; Jirková, H.; F.-X. Wagner, M.
Effect of Input Structure of Blank on Development of Final Structure when Processing at Temperatures between Solidus and Liquidus. In DAAAM 2014. Vienna: Procedia Engineering, 2015. s. 722-729. ISBN: neuvedeno , ISSN: 1877-7058

277) Materiálově-technologické modelování procesu termomechanického zpracování zápustkového výkovku z mikrolegované oceli
Vančura, F.; Vorel, I.; Pileček, V.; Mašek, B.
Materiálově-technologické modelování procesu termomechanického zpracování zápustkového výkovku z mikrolegované oceli. Kovárenství, 2015, roč. 53, č. duben 2015, s. 52-55. ISSN: 1213-9289

278) Various approaches to accelerated carbide spheroidization of 54SiCr Steel
Kučerová, L.; Jirková, H.; Mašek, B.
Various approaches to accelerated carbide spheroidization of 54SiCr Steel. Key Engineering Materials, 2015, roč. 647, č. 2015, s. 3-8. ISSN: 1662-9795

279) 25 let - ohlédnutí vpřed
Jirková, H.; Mašek, B.
25 let - ohlédnutí vpřed. Kovárenství, 2015, roč. 53, č. duben 2015, s. 73-76. ISSN: 1213-9289

280) Innovative Konzepte für Innehochdruckumformen
Mašek, B.; Jirková, H.; Vorel, I.; Kůrka, P.; Mahn, U.
Innovative Konzepte für Innehochdruckumformen. In XXXIV. Verformungskundliches Kolloquium. Leoben: Lehrstuhl für Umformtechnik, Leoben, 2015. s. 164-168. ISBN: 978-3-902078-20-9

281) Improvement of pavement foundation response with multi-layers of geocell reinforcement: Cyclic plate load test
Khalaj, O.; S. N. Moghaddas Tafreshi; Mašek, B.; A. R. Dawson
Improvement of pavement foundation response with multi-layers of geocell reinforcement: Cyclic plate load test. Geomechanics and Engineering, 2015, roč. 9, č. 3, s. 373-395. ISSN: 2005-307X

282) Mechanical Properties of Laser Welds In Martensitic-Austenitic AHS Steel
Mašek, B.; Rubešová, K.; Khalaj, O.; Jirková, H.
Mechanical Properties of Laser Welds In Martensitic-Austenitic AHS Steel. In MOTSP 2015. Zagreb: Croatian Association for PLM, 2015. s. 1-4. ISBN: neuvedeno , ISSN: 1849-7586

283) Stabilization of Retained Austenite in High-Strength Martensitic Steels with Reduced Ms Temperature
Ibrahim, K.; Bublíková, D.; Jirková, H.; Mašek, B.
Stabilization of Retained Austenite in High-Strength Martensitic Steels with Reduced Ms Temperature. In METAL 2015 24th International Conference on Metallurgy and Materials. Ostrava: TANGER spol. s r. o., 2015. s. 499-504. ISBN: 978-80-87294-62-8

284) Development of Numerical Models for the Heat-Treatment-process Optimisation in a Closed-Die Forging Production
Maleček, L.; Fedorko, M.; Vančura, F.; Jirková, H.; Mašek, B.
Development of Numerical Models for the Heat-Treatment-process Optimisation in a Closed-Die Forging Production. Materiali in Technologije, 2015, roč. 49, č. 3, s. 471-475. ISSN: 1580-2949

285) Mechanické vlastnosti laserových svarových spojů na martenziticko-austenitické AHS oceli
Mašek, B.; Rubešová, K.; Khalaj, O.; Jirková, H.
Mechanické vlastnosti laserových svarových spojů na martenziticko-austenitické AHS oceli. Zváranie / Svařování, 2015, roč. 64, č. 1-2/2015, s. 16-18. ISSN: 0044-5525

286) Comparative Study of Algorithms Used for Automated Evaluation of the Tensile Tests Results
Káňa, J.; Jeníček, Š.; Mašek, B.
Comparative Study of Algorithms Used for Automated Evaluation of the Tensile Tests Results. In METAL 2015 24th International Conference on Metallurgy and Materials. Ostrava: © 2015 TANGER Ltd., 2015. s. 688-692. ISBN: 978-80-87294-62-8

287) New Manufacturing Processes for Products from Ultra High Strength Steels
Mašek, B.; Jirková, H.; Vorel, I.; Aišman, D.; M. F.-X. Wagner
New Manufacturing Processes for Products from Ultra High Strength Steels. In ICAFT 2015. Fraunhofer IWU: © 2015 Fraunhofer Institute for Machine Tools and Forming Technology IWU, 2015. s. 493-503. ISBN: 978-3-95735-029-9

223) New Material Concepts for Forgings
Mašek, B.;Jirková, H.
New Material Concepts for Forgings. International Journal of Advancements in Mechanical and Aeronautical Engineering– IJAMAE, 2014, roč. 1, č. 2, s. 10-14. ISSN: 2372-4153

224) New Material Concepts for Forgings
Mašek, B.;Jirková, H.
New Material Concepts for Forgings. In ACSME 2014. Santa Barbara: Institute of Research Engineers and Doctors, 2014. s. 92-96. ISBN: 978-981-07-8859-9

225) Use of Material-technological Modelling in Die Forging
Pileček, V.; Vančura, F.; Jirková, H.; Mašek, B.
Use of Material-technological Modelling in Die Forging. In PROGRAM AND BOOK OF ABSTRACTS. Ljubljana: Copyright © Institute of Metals and Technology, 2014. s. 186. ISBN: 978-961-92518-7-4

226) Effect of Modyfying X210CR12 Steel Stock Structure Using High Pressure Torsion on Resulting Structure after Mini-thixoforming
Mašek, B.; Vančura, F.; Aišman, D.; Jirková, H.; F.-X. Wagner, M.
Effect of Modyfying X210CR12 Steel Stock Structure Using High Pressure Torsion on Resulting Structure after Mini-thixoforming. 2014,

227) Use of Semi-solid Processing (Mini-thixoforming) to Produce al Reinforced Metallic Glass Composites
Yilmaz Atay, H.; Aišman, D.; Jirková, H.; Mašek, B.
Use of Semi-solid Processing (Mini-thixoforming) to Produce al Reinforced Metallic Glass Composites. 2014,

228) Forming and Microstructure Development of AHS Steels by Temperatures under AC3
Jirková, H.; Opatová, K.; Jeníček, Š.; Mašek, B.
Forming and Microstructure Development of AHS Steels by Temperatures under AC3. In COMAT 2014. Ostrava: TANGER Ltd., 2014. s. 39-47. ISBN: 978-80-87294-45-1 , ISSN: 1662-8985

229) Microstructure of Tool Steel upon Combined Semi-Solid Processing and Thermomechanical Treatment
Mašek, B.; Aišman, D.;Jirková, H.
Microstructure of Tool Steel upon Combined Semi-Solid Processing and Thermomechanical Treatment. Journal of Alloys and Compounds, 2014, roč. 586, č. 1, s. S165-S167. ISSN: 0925-8388

230) Transformation-Induced Plasticity in Steel for Hot Stamping
Mašek, B.; Štádler, C.; Jirková, H.; Feuser, P.; Selig, M.
Transformation-Induced Plasticity in Steel for Hot Stamping. MATERIALI IN TEHNOLOGIJE, 2014, roč. 48, č. 4, s. 555-557. ISSN: 1580-2949

231) Modification of Metastable Microstructure of CPM15V Steel by Heat Exposure after Treatment in Semi-Solid State
Vančura, F.; Mašek, B.; Aišman, D.; Jirková, H.; X.-F. Wagner, M.; Marcus Böhme, M.
Modification of Metastable Microstructure of CPM15V Steel by Heat Exposure after Treatment in Semi-Solid State. Journal of Alloys and Compounds, 2014, roč. 586, č. 1, s. S159-S164. ISSN: 0925-8388

232) Apparatus For Bulge Testing Metal Foils using a Laser Scanner
Káňa, J.; Mašek, B.; Jeníček, Š.; Ronešová, A.
Apparatus For Bulge Testing Metal Foils using a Laser Scanner. In DAAAM 2013. Vienna: DAAAM International Vienna 2013, 2014. s. 1029-1032. ISBN: neuvedeno , ISSN: 1877-7058

233) Designing Q&P Process for Experimental Steel with 0.47 % Carbon Content
Pileček, V.; Jirková, H.; Mašek, B.
Designing Q&P Process for Experimental Steel with 0.47 % Carbon Content. In Advanced Materials Research. Durnten-Zurich, Switzerland: Scientific.Net Materials Science and Engineering, 2014. s. 257-261. ISBN: 978-3-03835-014-9 , ISSN: 1022-6680

234) Mini-thixoforming of Variously Modified States of the Stock Structure of Tool Steel X210Cr12
Mašek, B.; Vančura, F.; Jirková, H.; Böehme, M.; Frint, P.
Mini-thixoforming of Variously Modified States of the Stock Structure of Tool Steel X210Cr12. MATERIALI IN TEHNOLOGIJE/MATERIALS AND TECHNOLOGY, 2014, roč. 48, č. 6, s. 875-880. ISSN: 1580-2949

235) Influence of Metastable Retained Austenite on Macro and Micromechanical Properties of Steel Processed by the Q-P Process
Jirková, H.; Mašek, B.; F.-X. Wagner, M.; Langmajerová, D.; Kučerová, L.; Treml, R.; Kiener, D.
Influence of Metastable Retained Austenite on Macro and Micromechanical Properties of Steel Processed by the Q-P Process. Journal of Alloys and Compounds, 2014, roč. 615, č. 1, s. 163-168. ISSN: 0925-8388

236) Effect of the Initial Microstructure on the Properties of Low-Alloyed Steel upon Mini-Thixoforming
Mašek, B.; Aišman, D.; Jirková, H.
Effect of the Initial Microstructure on the Properties of Low-Alloyed Steel upon Mini-Thixoforming. MATERIALI IN TEHNOLOGIJE/MATERIALS AND TECHNOLOGY, 2014, roč. 48, č. 5, s. 719-723. ISSN: 1580-2949

237) Modelling a Process chain of die Forging Process
Mašek, B.; Pileček, V.; Vančura, F.; Jirková, H.
Modelling a Process chain of die Forging Process. In XXXIII. Verformungskundliches Kolloquium. Leoben: Lehrstuhl für Umformtechnik, Leoben, 2014. s. 72-76. ISBN: 978-3-902078-19-3

238) Innovative Konzepte für die Innenhochdruckumformung
Mašek, B.; Jirková, H.; Vorel, I.
Innovative Konzepte für die Innenhochdruckumformung. In Hydroumformung von Blechen, Rohren und Profilen. Germany: MAT INFO Werkstoff-Informationsgesellschaft mbH, 2014. s. 111-119. ISBN: 978-3-88355-399-3

239) Material-Technological Modelling of Closed Die Forging of 42CrMoS4 Steel
Pileček, V.; Vančura, F.; Jirková, H.; Mašek, B.
Material-Technological Modelling of Closed Die Forging of 42CrMoS4 Steel. MATERIALI IN TEHNOLOGIJE/MATERIALS AND TECHNOLOGY, 2014, roč. 48, č. 6, s. 869-873. ISSN: 1580-2949

240) Material-Technological Modelling of Closed Die Forging of 42CrMoS4 Steel
Kučerová, L.; Jirková, H.; Mašek, B.
Various approaches to accelerated carbide spheroidization of 54SiCr Steel. In Přínos metalografie pro řešení výrobních problémů. Praha: ČVUT v Praze, Fakulta strojní a Výzkumný a zkušební ústav Plzeň, s. r. o., 2014. s. 14-20. ISBN: 978-80-01-05474-1 , ISSN: 0255-5476

241) Semi-Solid Processing of Powder Steels in Cryogenically-Cooled Die
Mašek, B.; Aišman, D.; Rubešová, K.; Jirková, H.
Semi-Solid Processing of Powder Steels in Cryogenically-Cooled Die. In THERMEC 2013. neuvedeno: Materials Science Forum, 2014. s. 801-806. ISBN: 978-3-03835-073-6 , ISSN: 0255-5476

242) Long Term Bainite Annealing
Bublíková, D.; Kučerová, L.; Jirková, H.; Mašek, B.
Long Term Bainite Annealing. In METAL 2014. Ostrava: TANGER spol. s r. o., 2014. s. 523-527. ISBN: 978-80-87294-54-3

243) Semi-solid Processing of Metal-oxide Composite
Jirková, H.; Aišman, D.; Mašek, B.; Svoboda, J.
Semi-solid Processing of Metal-oxide Composite. In METAL 2014. Ostrava: TANGER spol. s r. o., 2014. s. 686-691. ISBN: 978-80-87294-54-3

244) Unconventional Microstructures in Tool Steel Obtained by Semi-Solid Processing and Subsequent Heat Treatment
Aišman, D.; Mašek, B.; Jeníček, Š.
Unconventional Microstructures in Tool Steel Obtained by Semi-Solid Processing and Subsequent Heat Treatment. In Solid State Phenomena. Pfaffikon: Trans Tech Publications Ltd., 2014. s. 235-240. ISBN: 978-3-03835-220-4 , ISSN: 1662-9779

245) High-Strength Martensitic Steels with Low Ms Temperature
Bublíková, D.; Mašek, B.; Jirková, H.; Jeníček, Š.; Ibrahim, K.; Čubrová, J.
High-Strength Martensitic Steels with Low Ms Temperature. In COMAT 2014. Ostrava: TANGER Ltd., 2014. s. 1-6. ISBN: 978-80-87294-45-1

246) Optimisation of the Q-P Process Parameters for Low Alloyed Steels with 0.2% C
Jirková, H.; Kučerová, L.; Aišman, D.; Mašek, B.
Optimisation of the Q-P Process Parameters for Low Alloyed Steels with 0.2% C. Archives of Metallurgy and Materials, 2014, roč. 59, č. 3, s. 1205-1210. ISSN: 1733-3490

247) Tváření AHS oceli vnitřním přetlakem
Mašek, B.; Vorel, I.; Jirková, H.; Kurka, P.
Tváření AHS oceli vnitřním přetlakem. Kovárenství, 2014, roč. 50, č. září 2014, s. 5-8. ISSN: 1213-9289

248) The Effect of Alloying on Mechanical Properties of Advanced High Strength Steels
Kučerová, L.; Jirková, H.; Mašek, B.
The Effect of Alloying on Mechanical Properties of Advanced High Strength Steels. Archives of Metallurgy and Materials, 2014, roč. 3, č. 59, s. 1189-1192. ISSN: 1733-3490

249) Combination of International High Pressure Forming and Q-P Process for Production of Hollow Products from AHS Steel
Mašek, B.; Vorel, I.; Jirková, H; Kůrka, P.
Combination of International High Pressure Forming and Q-P Process for Production of Hollow Products from AHS Steel. In COMAT 2014. Ostrava: TANGER Ltd., 2014. s. 1-7. ISBN: 978-80-87294-45-1

250) Static plate load tests on multi-layered geocell-reinforced bed
S. N. Moghaddas Tafreshi; Khalaj, O.; A. R. Dawson; Mašek, B.
Static plate load tests on multi-layered geocell-reinforced bed. In 10th International Conference on Geosynthetics, ICG 2014. German Geotechnical Society, Essen: Deutsche Gesellschaft für Geotechnik e.V., 2014. s. 1-8. ISBN: 978-3-9813953-9-6

213) The Use of Explosive Energy for Joining Advanced High Strength Low Alloy Steels
Urbánek, M.; Mašek, B.; Hronek, P.; Nesvadba, P.
The Use of Explosive Energy for Joining Advanced High Strength Low Alloy Steels. Journal of Materials Engineering and Performance, 2013, roč. 22, č. 3/2013, s. 748-752. ISSN: 1059-9495

214) New Technological Concepts of Long Products based on HDQT - High Deformation Quenching and Tempering System
Borowikow, A.; Mašek, B.; Jirková, H.; Jeníček, Š.; Bublíková, P.;
New Technological Concepts of Long Products based on HDQT - High Deformation Quenching and Tempering System. In ROLLING 2013. Venice: Associazione Italiana di Metallurgia, 2013. s. 1-7. ISBN: 978-88-85298-95-8

215) Prototyping as a Tool for Rapid Development of Components for Sporting Equipment
Štádler, C.; Kroták, S.; Neuman, J.; Mašek, B.
Prototyping as a Tool for Rapid Development of Components for Sporting Equipment. Advanced Materials Research, 2013, roč. 628, č. neuveden, s. 491-496. ISSN: 1022-6680

216) Micro-Compression Test of Thixoformed Austenite
Mašek, B.; Aišman, D.; Jirková, H.; Wurster, S.
Micro-Compression Test of Thixoformed Austenite. In Solid State Phenomena. Durnten-Zurich, Switzerland: Trans Tech Publications, 2013. s. 215-218. ISBN: 978-3-03785-481-5 , ISSN: 1012-0394

217) Mini-thixoforming of a Steel Produced by Powder Metallurgy
Jirková, H.; Aišman, D.; Sen, I.; F.-X. Wagner, M.; Behúlová, M; Kusý, M.; Mašek, B.
Mini-thixoforming of a Steel Produced by Powder Metallurgy. In Solid State Phenomena. Durnten-Zurich, Switzerland: Trans Tech Publications, 2013. s. 500-505. ISBN: 978-3-03785-481-5 , ISSN: 1012-0394

218) Microstructure of X210Cr12 steel after the forming in semi-solid state visualized by very low energy SEM in ultra high vacuum
Mikmeková, Š.; Mašek, B.; Jirková, H.; Aišman, D.; Müllerová, I.; Frank, L.
Microstructure of X210Cr12 steel after the forming in semi-solid state visualized by very low energy SEM in ultra high vacuum. Applied Surface Science, 2013, roč. 275, č. Neuveden, s. 403-408. ISSN: 0169-4332

219) Energy- and Time-Saving Low Temperature Thermomechanical Treatment of Low-Carbon Plain Steel
Jirková, H.; Hauserová, D.; Kučerová, L.; Mašek, B.
Energy- and Time-Saving Low Temperature Thermomechanical Treatment of Low-Carbon Plain Steel. MATERIALI IN TEHNOLOGIJE/MATERIALS AND TECHNOLOGY, 2013, roč. 47, č. 3, s. 335-339. ISSN: 1580-2949

220) Nové koncepce výkovků
Jirková, H.; Mašek, B.
Nové koncepce výkovků. Kovárenství, 2013, roč. 47, č. květen 2013, s. 52-56. ISSN: 1213-9289

221) MATERIÁLOVĚ-TECHNOLOGICKÉ MODELOVÁNÍ VÝVOJE STRUKTURY VE STRATEGICKÉ ČÁSTI ZÁPUSTKOVÉHO VÝKOVKU
Vančura, F.; Pileček, V.; Bublíková, P.; Jirková, H.; Mašek, B.
MATERIÁLOVĚ-TECHNOLOGICKÉ MODELOVÁNÍ VÝVOJE STRUKTURY VE STRATEGICKÉ ČÁSTI ZÁPUSTKOVÉHO VÝKOVKU. Kovárenství, 2013, roč. 47, č. květen, s. 114-117. ISSN: 1213-9289

222) Low-cost and Time-saving Thermomechanical Treatment on the 54SiCr Steel
Mašek, B.; Pileček, V.
Low-cost and Time-saving Thermomechanical Treatment on the 54SiCr Steel. In PRICM 8. Hoboken: Wiley, 2013. s. 679-685. ISBN: 978-0-470-94309-0

194) Effect of Quenching and Partitioning Temperatures in the Q-P Process on the Properties of AHSS with Various Amounts of Manganese and Silicon
Jirková, H.; Kučerová, L.; Mašek, B.
Effect of Quenching and Partitioning Temperatures in the Q-P Process on the Properties of AHSS with Various Amounts of Manganese and Silicon. Materials Science Forum, 2012, roč. 706-709, č. Neuveden, s. 2734-2739. ISSN: 0255-5476

195) Rapid Spheroidization and Grain Refinement Caused by Thermomechanical Treatment for Plain Structural Steel
Mašek, B.; Jirková, H.; Kučerová, L.
Rapid Spheroidization and Grain Refinement Caused by Thermomechanical Treatment for Plain Structural Steel. Materials Science Forum, 2012, roč. 706-709, č. Neuveden, s. 2770-2775. ISSN: 0255-5476

196) Stability of retained austenite during cold deformation of low-alloyed trip steels
Mašek, B,; Jirková, H.; Kučerová, L.; Petrenec, M.; Beran, P.; Lothar W. Meyer
Stability of retained austenite during cold deformation of low-alloyed trip steels. In Non-linear Response of Conventional & Advanced Materials, and Multi-scale Modeling. Fulton: Neat Press, 2012. s. 115-117. ISBN: 0-9659463-0-4

197) Microstructure and mechanical behavior of a mini-thixoformed tool steel
Jirková, H.; Mašek, B.; Böhme, M.; F.-X. Wagner, M.
Microstructure and mechanical behavior of a mini-thixoformed tool steel. Metallurgical and Materials Transactions A, 2012, roč. 43, č. 9, s. 3034-3038. ISSN: 1073-5623

198) Measurement of properties of high-strength low-alloyed steel under dynamic load in real-world conditions of deformation at elevated temperatures
Jeníček, Š.; Kučerová, L.; Jirková, H.; Mašek, B.
MEASUREMENT OF PROPERTIES OF HIGH-STRENGTH LOW-ALLOYED STEEL UNDER DYNAMIC LOAD IN REAL-WORLD CONDITIONS OF DEFORMATION AT ELEVATED TEMPERATURES. In METAL 2012. Ostrava: TANGER, 2012. s. 712-717. ISBN: 978-80-87294-31-4

199) Carving, Metalforming and EDS - three extreme Inspirations for one Result
Mašek, B.; Kroták, S.; Neuman, J.; Štádler, C.
Carving, Metalforming and EDS - three extreme Inspirations for one Result. In XXXI. Verformungskundliches Kolloquium. Leoben: Lehrstuhl für Umformtechnik, Leoben, 2012. s. 41-44. ISBN: 978-3-902078-17-9

200) Development of microstructure from powder tool steel obtained through semi-solid metal working
Mašek, B.; Aišman, D.; Jirková, H.; Kusý, M.;
Development of microstructure from powder tool steel obtained through semi-solid metal working. In METAL 2012. Ostrava: TANGER, spol. s.r.o., 2012. s. 318-322. ISBN: 978-80-87294-31-4

201) The Influence of the Temperature of the Processing on the Final Structure of the Metal-Ceramic Compact Obtained through the Semi-Solid State
Eliášová, I.; Mašek, B.; Kusý, M.; Jirková, H.; Svoboda, J.;
The Influence of the Temperature of the Processing on the Final Structure of the Metal-Ceramic Compact Obtained through the Semi-Solid State. In METAL 2012. Ostrava: TANGER, 2012. s. 283-288. ISBN: 978-80-87294-31-4

202) Effect of Advanced Thermomechanial Treatment on mechanical properties of low alloyed high strength steels
Jirková, H.; Kučerová, L.; Prucha, V.; Mašek, B.
Effect of Advanced Thermomechanial Treatment on mechanical properties of low alloyed high strength steels. In METAL 2012. Ostrava: TANGER, spol. s.r.o., 2012. s. 532-538. ISBN: 978-80-87294-31-4

203) Straw, Explosion and AHS Steel - Three Inspirations, One Result
Mašek, B.; Urbánek, M.; Hronek, P.; Štádler, C.; Nesvadba, P.
Straw, Explosion and AHS Steel - Three Inspirations, One Result. Kovárenství, 2012, roč. 2012, č. 44, s. 5-8. ISSN: 1213-9289

204) Influence of Chronium and Manganese on Mechanical Properties of Low Alloyed High Strength Steels with Retained Austenite Processed by Modern Methods of Thermomechanical Treatment
Jirková, H.; Klokan, M.; Kučerová, L.; Mašek, B.
Influence of Chronium and Manganese on Mechanical Properties of Low Alloyed High Strength Steels with Retained Austenite Processed by Modern Methods of Thermomechanical Treatment. In COMAT 2012 : Recent trends in strutural materials. Ostrava: TANGER, 2012. s. 80-86. ISBN: 978-80-87294-38-3

205) The Potential of Steels with High Content of Vanadium and Chronium Produced by Powder Metallurgy for Processing by the Mini-thixoforming
Mišterová, H.; Jirková, H.; Aišman, D.; Mašek, B.
The Potential of Steels with High Content of Vanadium and Chronium Produced by Powder Metallurgy for Processing by the Mini-thixoforming. In COMAT 2012 : Recent trends in structural materials. Ostrava: TANGER, 2012. s. 105-110. ISBN: 978-80-87294-38-3

206) Enhancement of-carbide spheroidization in Spring Steel by Low-Temperature Thermo-Mechanical Processing
Kučerová, L.; Jirková, H.; Pileček, V.; Štádler, C.; Mašek, B.
Enhancement of-carbide spheroidization in Spring Steel by Low-Temperature Thermo-Mechanical Processing. In COMAT 2012 : recent trends in structural materials. Ostrava: TANGER, 2012. s. 87-92. ISBN: 978-80-87294-38-3

207) Aplication of the Unconventional Thermomechanical Treatment on Low-Alloyed High-Strength Steel
Langmajerová, D.; Jirková, H.; Mikmeková, Š.; Mašek, B.
Aplication of the Unconventional Thermomechanical Treatment on Low-Alloyed High-Strength Steel. In COMAT 2012 : Recent trends in structural materials. Ostrava: TANGER, 2012. s. 93-99. ISBN: 978-80-87294-38-3

208) The behavior of low-alloy high-strength steel after different types of processing for dynamic load
Jeníček, Š.; Jirková, H.; Kučerová, L.; Mašek, B.
The behavior of low-alloy high-strength steel after different types of processing for dynamic load. Scientific reports : journal of the University of Applied Sciences Mittweida, 2012, roč. Neuveden, č. 4, s. 29-31. ISSN: 1437-7624

209) Unconventional Heat and Thermo-Mechanical Treatment of Steel with High Content of Metastable Austenite Gained in Semi-Solid State
Aišman, D.; Mašek, B.; Jirková, H.
Unconventional Heat and Thermo-Mechanical Treatment of Steel with High Content of Metastable Austenite Gained in Semi-Solid State. In COMAT 2012 : Recent trends in structural materials. Ostrava: TANGER, 2012. s. 100-104. ISBN: 978-80-87294-38-3

210) Innovative Concepts for Hot Stamping Process
Jirková, H.; Mašek, B.; Kučerová, L.; Zemko, M.
Innovative Concepts for Hot Stamping Process. Scientific reports : journal of the University of Applied Sciences Mittweida, 2012, roč. 2012, č. 4, s. 42-45. ISSN: 1437-7624

211) Development of Microstructure from Powder Tool Steel Obtained Through Semi-solid metal working
Mašek, B.; Aišman, D.; Jirková, H.; Kusý, M.
Development of Microstructure from Powder Tool Steel Obtained Through Semi-solid metal working. Scientific reports : journal of the University of Applied Sciences Mittweida, 2012, roč. Neuveden, č. 4, s. 26-28. ISSN: 1437-7624

212) The influence of deformation and cooling parameters after transition through semi-solid state on structure development of ledeburite steel
Aišman, D.; Jirková, H.; Mašek, B.
The influence of deformation and cooling parameters after transition through semi-solid state on structure development of ledeburite steel. Journal of Alloys and Compounds, 2012, roč. 536S, č. 1, s. 204-207. ISSN: 0925-8388

181) Straw, Explosion and AHS Steel Three Inspirations, One Result
Mašek, B.; Urbánek, M.; Hronek, P.; Štádler, C.; Nesvatba, P.
in: XXX. Verfomungskundliches Kolloquium, Planneralm, Österreich, p. 139-142, Buchmayer, B. (eds), Lehrstuhl für Umformtechnik, Leoben, ISBN 978-3-902078-15-5, 2011

182) Material-technological Modelling of Real Thin Sheet Rolling Process
Mašek, B.; Jirková, H.; Kučerová, L.; Ronešová, A.; Malina, J.
in: METAL 2011, Ostrava : TANGER, 2011. ISBN: 978-80-254-8683-2

183) The Role of a Cooling Rate in Thermo-mechanical Treatment with Incorporated Q-P Process
Mašek, B.; Kučerová, L.; Jirková, H.; Klauberová, D.
in: METAL 2011, Ostrava : TANGER, 2011. ISBN: 978-80-254-8683-2

184) Relationship between Initial and Resulting Microstructure of X210Cr12 Steel pon Short-term Semi-solid State Processing
Mašek, B.; Vanura, F.; Aišman, D.; Jirková, H.
in: METAL 2011, Ostrava : TANGER, 2011. ISBN: 978-80-254-8683-2

185) Processing of powder Fe - Al - Al2O3 deformation in semi solid state with rapid solidification
Mašek, B.; Svoboda, J.; Eliášová, I.; Kusý, M.; Jirková, H.
in: METAL 2011, Ostrava : TANGER, 2011. ISBN: 978-80-254-8683-2

186) Influence of Cavity Shape and Entry Hole on Minithixoforming
Aišman, D.; Jirková, H.; Behulová, M.; Mašek, B.
in: METAL 2011, Ostrava : TANGER, 2011. ISBN: 978-80-254-8683-2

187) Thermomechanical Simulation of the Service Load Transients of Hot Forging Tools
Neugebauer. R.; Avila, M.; Mašek, B.
in: 8. Conference of the Czech Forging Institute, Kovárenství 41/2011, p. 27-30, ISSN 1213-9289

188) Controlled Cooling of Steel Die Forgings
Mašek, B.; Vanura, F.; Jeníček, Š.
in: 8. Conference of the Czech Forging Institute, Kovárenství 41/2011, ISSN 1213-9289

189) New Innovative Concepts for Using Modern High-Strength Steels in Metal Forming
Mašek, B.
in: International Conference New Development in Forging Technology, Liewald M.(eds), MAT INFO Werkstoff-Informationsgesellschaft mbH, Frankfurt, p. 241-269, Stuttgart, Germany, ISBN 987-3-88355-386-3

190) Comparison of Microstructures and Properties Obtained after Different Heat Treatment Strategies of High Strength Low Alloyed Steel
Kuerová, L.; Jirková, H.; Hauserová, D.; Mašek, B.
In: Journal of Iron and Steel Research International, Volume 18, Supplement 1-1, p. 427-431, May 2011, ISSN 1006-706X

191) Improvement of Mechanical Properties of automotive Components Using Hot Stamping with Integrated Q-P Process
Mašek, B.; Jirková, H.; Kučerová, L.; Zemko, M.
In: Journal of Iron and Steel Research International, Volume 18, Supplement 1-1, p. 427-431, May 2011, ISSN 1006-706X

192) Material-technological Modelling of Various Holding Times at the Partitioning Temperature in AHSS with Different Alloying Strategies
Mašek, B.; Jirková, H.; Kučerová, L.; Klauberová, D.
in: 3rd International Conference on Heterogeneous Material Mechanics - ICHMM-2011, May 2011, Shanghai, China

193)Comparison of the Results Obtained by Q-P Process and Conventional Quenching and Tempering
Kučerová L., Jirková H., Hauserová, D., Mašek, B.,
in: 12. Česko-slovenské konference Přínos metalografie pro ošení výrobních problémů, Lázni Libverda, 14-16.červen 2011, EVUT v Praze a Výzkumný a zkušbní ústav Plzeo s.r.o. (eds.), Česká technika, nakladatelství ČVUT Praha, 2011, p. 51-54, ISBN 978-80-01-04822-1

151) Alternative Explosion-Formed Joint of High-Strength Tube and Sleeve
Mašek, B; Urbánek, M; Nesvadba, P; Hronek, P
in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 1181-1182, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5

152) Alternativní spoj vysokopevné trubky s objímkou vytvooený výbuchem
Mašek, B; Urbánek, M; Nesvadba, P; Hronek, P
in: 1st International Conference about Recent Trends in Structural Materials, pp. 205 211, Pilsen, Czech Republic, 2010, ISBN 978-80-254-8683-2

153) Fatigue Life Improvement by Thermo-mechanical Treatment of 34CrNiMo6 Steel
Dugan, J.; Nový, Z. ; Motyška, P.; Martínková; J., Martínek, P
in: Proceedings of International Conference on Advanced Steels 2010: Metallurgical Industry Press, China, ISBN 978-7-5024-5423-4

154) Mini-thixoforming Tool Steel X210Cr12
Aišman, D.; Jirková, H.; Mašek, B.
in: 1st International Conference about Recent Trends in Structural Materials, pp. 135 139, Pilsen, Czech Republic, 2010, ISBN 978-80-254-8683-2

155) Unconventional Thermomechanical Treatment of Advanced High Strength Low-alloyed Steel
Mašek, B.; Jirková, H.; Klauberová, D.; Petrenec, M.; Beran, P.
in: 1st International Conference about Recent Trends in Structural Materials, pp. 173-179, Pilsen, Czech Republic, 2010, ISBN 978-80-254-8683-2

156) Influence of Initial Pearlite Morphology on the Resulting Structure and Distribution of Deformation after Cold Flow Forming Process
Malina, J.; Jirková, H.; Mašek, B.
in: 1st International Conference about Recent Trends in Structural Materials, pp. 167 172, Pilsen, Czech Republic, 2010, ISBN 978-80-254-8683-2

157) Steel and What We Still Do not Know about It
Mašek, B.
in: 1st International Conference about Recent Trends in Structural Materials, pp. 129 - 134, Pilsen, Czech Republic, 2010, ISBN 978-80-254-8683-2

158) Materiálově-technologické modelování cesta ke snížení nákladu při vývoji válcovacích procesů
Mašek, B.; Jirková, H.; Štádler, C.
in: 68. pracovní semináo spoleenosti Ocelové pásy - "Rekonstrukce a modernizace výrobních stroju a zaoízení se zamioením na válcování", Eeská republika, 2010

159) Miniaturization in Thixoforming
Mašek, B.; Aišman, D.; Hronek, P.; Jirková, H.; Jenníček, Š.
in: Science Journal, 2010, Nr. 4, MKER 7645, p.224-227, ISSN 1803-1269

160) Microstructure and Phase Composition of Steel X210Cr12 after the Forming in Semi-Solid State
Aišman, D.; Behúlová, M.; Jirková, H.; Mašek, B.
in: 23rd International Conference on Heat Treatment, November 2010, Jihlava, Czech Republic, ISBN 978-80-904462-3-6

161) Mikrostrukturní rozbor oceli 42SiCr
Kučerová, L.; Jirková, H.; Hauserová, D.; Mašek, B.
in 1. Mezinárodní konference Mikroskopie a nedestruktivní zkouení materiálu, Litomioice: FVTM UJEP Ústí n.L.,s. 1-10, 2010, ISBN: 978-80-7414-280-2

162) The Material-technological Modelling of the Real Dynamic Process
Mašek, B.; Jirková, H.; Malina, J.; Klauberová, D.
in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 169-170, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5

163) Influence of Deformation Intensity and Cooling Parametrs on Microstructure Development in QP Process
Klauberová, D.; Jirková, H.; Kučerová, L.; Mašek, B.; Hauserová, D.; Jeníček, Š.
in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 743-744, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5

164) Measurement Method for Determination of Material Properties in Condition of Rapid Heating andHigh Deformation Rates
Jeníček, Š.; Mašek, B.
in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 825-826, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5

165) Influence of Low Temperature Thermomechanical Treatment on Carbide Morphology of RSt37-2 Steel
Jirková, H.; Kučerová, L.; Malina, J.; Hauserová, D.; Aišman, D.; Mašek, B.
in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 25-26, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5

166) FEM Analyses of Connections for Several Structures of a Hydraulic Radial Forging Machine
Mašek, B.; Hronek, P.; Štádler, C.
in: Proceedings of the 21st DAAAM International Symposium Intelligent Manufacturing & Automation: Interdisciplinary Solutions, pp 885-886, Croatia, 2010, ISBN/ISSN 978-3-901509-73-5

167) The Influence of Incremental Deformation of AHSS on Stabilisation of Retained Austenite
Kučerová, L.; Klauberová, D.; Hauserová, D.; Mašek, B.
in: Proceedings of 2nd International Conference Super-High Strength Steels, Italy, 2010, ISBN 978-88-85298-79-8

168) Miniaturization in Thixoforming
Mašek, B.; Aišman, D.; Jirková, H.; Kučerová, L.
in: Kovárenství, Vol. 38, September 2010, ISSN 1213-9289

169) Structure of Miniature Components from Steel Produced by Forming in Semi-Solid State
Mašek, B.; Aišman, D.; Behulová, M.; Jirková, H.
in: Trans. Nonferrous Met. Soc. China 20 (2010), Vol. 20, pp 1037-s1041, ISSN: 1003-6326

170) Unconventional Thermomechanical Treatment of Advanced High Strength Low-Alloy Steel
Mašek, B.; Jirková, H.; Klauberová, D.; Petrenec, M.; Beran, P.
in: Proceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering, pp. 435-440, Tallinn, 2010, ISBN/ISSN 978-9985-59-982-2.

171) Fatigue Properties of Thin Wall Semi-Products Produced By Incremental Forming Processes
Mašek, B.; Malina, J.; Černý, I.; Cipera, M.; Hronek, P.; Jeníček, Š.
in: Proceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering, pp. 215-220, Tallinn, 2010, ISBN/ISSN 978-9985-59-982-2.

172) The Effect of Mn and Si on the Properties of Advanced High Strength Steels Processed by Quenching and Partitioning
Mašek, B.; Jirková, H.; Hauserová, D.; Kučerová, L.; Klauberová, D.
in: Materials Science Forum Vols. 654-656 (2010), pp 94-97

173) Advanced Material-Technological Modelling of Complex Dynamic Thermomechanical Processes
Mašek, B.; Jirková, H.; Malina, J.; Jeníček, Š.
in: Materials Science Forum Vols. 654-656 (2010), pp. 1594-1597

174) Analysis of 42SiCr steel after Quenching and Partitioning by Laser Scanning Confocal Microscopy
Kučerová, L.; Jirková, H.; Hauserová, D.; Mašek, B.
in: Proceedings of METAL 2010 - 19. Mezinárodní konference metalurgie a matariálu, pp. 83, 2010, ISBN/ISSN 978-80-87294-15-4.

175) Enhancing the Efficiency of Recycling White Bronze Chips
Jeníček, Š.; Aišman, D.; Jirková, H.; Mašek, B.
in: Proceedings of METAL 2010 - 19. Mezinárodní konference metalurgie a matariálu, pp. 107, 2010, ISBN/ISSN 978-80-87294-15-4.

176) Fatigue and Mechanical Properties of Thin Wall Semi-products Produced by Incremental Forming Processes
Malina, J.; Mašek, B.; Černý, I.; Eipera, M.; Mikulová, D.
in: Proceedings of METAL 2010 - 19. Mezinárodní konference metalurgie a matariálu, pp. 45, 2010, ISBN/ISSN 978-80-87294-15-4.

177) Project of Unconventional Technological Process Chain for the Production of Hollow Semi-products from Low-alloyed TRIP Steel in Steel Innovation Award 2009
Mašek, B.; Jirková, H.; Meyer, L.; Malina J.; Kučerová, L.
in: Proceedings of METAL 2010 - 19. Mezinárodní konference metalurgie a matariálu, pp. 45, 2010, ISBN/ISSN 978-80-87294-15-4.

178) Unconventional Structure of X210Cr12 Steel Obtained by Thixoforming
Jirková, H.; Aišman, D.; Mašek, B.
in: Journal of Alloys and Compounds, Journal of Alloys and Compounds 504S (2010) S500S503, ISSN: 0925-8388

179) Numerical Simulation of Induction Heating of a Rod Semiproduct for the Process of Rotary Spin Extrusion
Behúlová, M.; Mašek, B.; Meyer, L. W.
in: Kovové materiály, Vol. 48 (2010), No. 5, pp. 327 336, Bratislava: SAP-Slovak Academic Press, ISSN 0023-432X

180) Thixoforming von Stahl - ein bisher unerforschtes Verfahren mit großem Potenzial
Mašek, B.; Jirková, H.; Aišman, D.; Hronek, P.
in: XXIX. Verformungskundliches Kolloquium, Planneralm, Österreich, ISBN 978-3-902078-14-8, März 2010

137) Material-technology Modelling the Development of Structures in Wires during Controlled Cooling on Industrial Cooling Conveyors
Mašek, B.; Jirková, H.; Malina, J.; Ronešová, A.
in: Proceedings of the XXVIII. Verformungskundliches Kolloquim, 2009, Östereich, ISBN: 978-3-902078-11-7

138) Hydraulický stroj pro flexibilní radální tvárení
Mašek, B.; Hronek, P.; Bubák, A.; Štádler, C.
in: 7. kovárenská konference Mechanizace a automatizace v kovárnách, Brno, 13.-14.5.2009, CZ

139) New Possibilities in Material-Technological Modelling for Real Rolling Technology Production Chains
Mašek, B.; Jirková, H.; Malina, J.; Ronešová, A.
in: Proceedings of the 5th European Rolling Conference, June 2009, England

140) Heat Treatment with Local Distribution of Carbon for Stabilizing Retained Austenite
Aišman, D.; Jirková, H.; Kučerová, L.; Mašek, B.
in: 8. Industriefachtagung Oberflächen- und Wärmebehandlungstechnik und 12. Werkstofftechnischen Kolloquium, pp. 229-235, ISSN 1439-1597, ISBN 978-3-00-029007-1

141) Influence of Austenitization Temperature and Number of Incremental Steps on Structure Development of TRIP-Steel
Jirková, H.; Rezek, M.; Meyer, L. W.; Mašek, B.
in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1461-1462, ISSN 1726-9679, ISBN 978-3-901509-70-4

142) Optimization of Recycling of White Bronze Chips
Jenícek, Š.; Jirková, H.; Kučerová, L.; Mašek, B.
in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1135-1136, ISSN 1726-9679, ISBN 978-3-901509-70-4

143) Forming Technology of Small Parts in Semisolid State
Aišman, D.; Jirková, H.; Mašek, B.
in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1895-1896, ISSN 1726-9679, ISBN 978-3-901509-70-4

144) Achieving an Excellent Combination of Mechanical Properties in Multiphase Steels by Controlled Development of Microstructure
Klauberová, D.; Jirková, H.; Malina, J.; Mašek, B.
in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1157-1158, ISSN 1726-9679, ISBN 978-3-901509-70-4

145) Influence of the Forming Conditions on the Mechanical Properties of the Final Product, when Using the Flow Forming Process
Malina, J.; Jirková, H.; Mašek, B.
in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1719-1720, ISSN 1726-9679, ISBN 978-3-901509-70-4

146) Optimization of Q-P Process Parameters with Regard to Final Microstructures and Properties
Kucerová, L.; Aišman, D.; Jirková, H.; Hauserová, D.
in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1035-1036, ISSN 1726-9679, ISBN 978-3-901509-70-4

147) Investigation of Phase Transformations in High-strength Low-alloyed Steel
Hauserová, D.; Jirková, H.; Mašek, B.
in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1897-1898, ISSN 1726-9679, ISBN 978-3-901509-70-4

148) Possibilities for Enhancing Pressing Force of Pull Down Hydraulic Press
Mašek, B.; Hronek, P.; Štádler, C.
in: Proceedings of the 20th International DAAAM Symposium Intelligent Manufacturing & Automation: Theory, Practice & Education, 2009, Vol. 20, No. 1, pp. 1917-1918, ISSN 1726-9679, ISBN 978-3-901509-70-4

149) Únavová odolnost cementovaných a necementovaných trubek s defekty na vnitrním povrchu
Cipera M., Černý I., Pospíchal V., Mikulová D., Fürbacher I.
in: SEMDOK 2010, Terchová, Slovensko

150) Computer Aided Design and Analysis of Dynamic Induction Heating
Behúlová, M.; Mašek, B.; Meyer, L.W.
in: Proceedings of the 4th international conference on manufacturing science and education, Vol.I, II. Romania, Sibiu, June 2009, ISSN 1843-2522

119) Einsatz von preisgünstig legierten hochfesten Stählen für die unkonventionelle thermomechanische Herstellung von Hohlteilen
Mašek, B.; Klauberová, D.; Staňková, H.; Malina, J.; Glass, R.; Meyer, L. W.
in: XXVII. Verformungskundliches Kolloquium, Planneralm, Österreich, ISBN 978-902078-09-07, März 2008

120) Vliv tepelného zpracování na vlastnosti vysocepevné nízkolegované oceli
Aišman, D.
in: SVOC 2008, Západoceská univerzita v Plzni, 2008, ISBN 978-80-7043-667-1

121) Einfluss der thermomechanischen Behandlung mit inkrementellen Deformationen auf die Eigenschaften von TRIP-Stählen
Stanková, H.
in: SVOC 2008, Západoceská univerzita v Plzni, 2008, ISBN 978-80-7043-667-1

122) FEM Modeling of Hose Spring Clamp
Hronek, P.; Štádler, C.; Mašek, B.; Chval, Z.
in: 2nd International Conference ERIN 2008, Bratislava, Slovak Republic, 23. 24. 4. 2008, ISBN 978-80-227-2849-2

123) Dosahování vynikajících kombinací mechanických vlastností u vícefázových ocelí rízeným vývojem mikrostruktury
Mašek, B.; Klauberová, D.; Staňková, H.; Malina, J.
in: 11. konference: Prínos metalografie pro reení výrobních problému, cerven 2008, ISBN 978-80-01-04039-3

124) Možnosti využití laserové řádkovací konfokální mikroskopie
Skálová, L.; Staňková, H.; Mašek, B.
in: 11. konference: Prínos metalografie pro reení výrobních problému, cerven 2008, ISBN 978-80-01-04039-3

125) Modelling Structure Development with High Gradient of the Changes in Physical Parameters
Mašek, B.; Staňková, H.; Klauberová, D.; Ronešová, A.
in: Second Internatinal Conference on Heterogeneour Material Mechanics, pp. 390-393, June 2008, China, ISBN 978-1-932078-80-0

126) Influence of Thixoforming on Structure Development of the Tool Steel
Stanková, H.; Klauberová, D.; Ronešová, A.; Mašek, B.
in: 12th International Research/Expert Conference TMT 2008, Turkey, 26. 30. August, 2008

127) Optimization of Recycling Process of White Bronyze Chips
Skálová, L.; Luka, J.; Mašek, B.
in: 12th International Research/Expert Conference TMT 2008, Turkey, 26. 30. August, 2008

128) Konstrukce manipulačních kletí pro robota na kovárenském pracovišti
Hlavác, J.; Duník, M.; Štýdler, C.; Mašek, B.
in: 49. Konference cástí a mechanismu stroju, Srní, Ceská republika, 8.-10. 9. 2008

129) Zkoušky mezní tvařitelnosti na vzorcích s nárukem
Hrdá, K.; Zemko, M.; Malina, J.; Jirková, H.; Mašek, B.
in: Kovárenství. 2008, roc. 2008, c.33, s.111-114, ISSN 1213-9289MK CR E1537

130) The Most Recent Findings from Physical-Material Modelling of UHSS Structure Development on a Thermomechanical Simulator
Mašek, B.; Stanková, H.; Klauberová, D.; Skálová, L.
in: 3rd International Conference on Thermomechanical Processing of Steel, Italy, September 2008

131) Analysis of Hydraulic Forging Press Structure and its Limits
Hronek, P.; tádler, C.; Mašek, B.
in: 6th International Conference on Computer Aided Design and Manufacturing CADAM 2008, pp. 19 - 20, Croatia, September 16 20, 2008, ISBN 978-953-7142-36-0

132) The Influence of Thermomechanical Treatment of TRIP Steel on its Final Microstructure
Mašek, B.; Stanková, H.; Nový, Z.; Meyer, L. W.; Kracík, A.
in: Journal of Materials Engineering and Performance, Online First, October 2008, ISSN 1544-1024

133) Analysis of the Influence of Surface Layer on the Final Stress State of a Specimen
Malina, J.; Behúlová, M.; Mašek, B.
in: Materials Science and Technology [online]. 2008, vol. 6., ISSN 1335-9053

134) Influence of Technological Parameters on the Final Product when Using Flow Forming Process
Malina, J.; Jirková, H.; Mašek, B.
in: Proceedings of the 19th International DAAAM Symposium, 2008, Vol. 19, No. 1, pp. 783-784, ISSN 1726-9679

135)Testing the Influence of the Q-P Process on the Development in High Strength Low-alloyed Steels
Aišman, D.; Jirková, H.; Skálová, L.; Mašek, B.
in: Proceedings of the 19th International DAAAM Symposium, 2008, Vol. 19, No. 1, pp. 007-008, ISSN 1726-9679

136) Improvement of mechanical properties of high strength low-alloyed steel by unconventional heat treatment
Mašek, B.; Jirková, H.; Aišman, D.; Skálová, L.
in: Proceedings of the 5th International Scientific Conference of Mechanical Engineering, COMEC 2008, Cuba, 2008, ISBN 978-959-250-404-2

102) Integration des interkritischen Glühens in eine Umformprozesskette für die Herstellung von Hohlteilen
Mašek, B.; Staňková, H.; Malina, J.; Glass, R.; Meyer, L. W.
in: XXVI. Verformungskundliches Kolloquium, Planneralm, Österreich, pp. 217-224, ISBN 978-902078-09-04, März 2007

103) Application of FEM simulation for the support of design and optimisation of froming process
Mašek, B.; Behúhlová, M.; Mahn, U.; Meyer, L. W.
in: XXVI. Verformungskundliches Kolloquium, Planneralm, Österreich, pp. 217-224, ISBN 978-902078-09-04, März 2007

104) Analyse des Einflusses der Eigenspannung und des Oberflächenreliefs auf die Spannungsverteilung unter Anwendung von FEM Simulation
Malina, J.; Behúhlová, M.; Staňková, H.; Mašek, B.
in: XXVI. Verformungskundliches Kolloquium, Planneralm, Österreich, pp. 217-224, ISBN 978-902078-09-04, März 2007

105) Utilisation of laser confocal microscope Olympus LEXT for the analysis of the fracture area of fine grain steel
Staňková, H.; Skálová, L.; Jacková, K.; Mašek, B.
in: Focus on Microscopy - FOM 2007, Valencia, Spain, April 2007

106) Advantages of laser confocal microscopy in microstructure analysis of TRIP steel
Skálová, L.; Staňková, H.; Mašek, B.
in: Focus on Microscopy - FOM 2007, Valencia, Spain, April 2007

107) Influence of aluminium on retained austenite stabilization during thermomechanical treatment of low-alloyed TRIP steel
Staňková, H.; Skálová, L.; Meyer, L. W.; Mašek, B.
in: Acta Metallurgica Slovaca 13, Vol.1, 2007, s. 208-213, ISSN: 1335-1532

108) Comparison of TRIP steel microstructures after thermo-mechanical treatment with isothermal and anisothermal deformation steps
Skálová, L.; Staňková, H.; Jandová, D.; Mašek, B.
in: Acta Metallurgica Slovaca 13, Vol.1, 2007, s. 208-213, ISSN: 1335-1532

Nové mžnosti materiálového modelování pro návrhy a optimalizaci kovárských technologií

110) Moderní koncepty mazání pro pouití v nárocných kovárských technologií
Hartwig, H.; Seidel, H.; Mašek, B.
in: 6. Kovárenská konference Nové technologie kování, s. 17, ISBN 978-80-239-8938-0, 2007

111) Nástroje pro extrémní deformace kovu
Nový, Z.; Jíra, T.; Zrník, J.; Kener, D.; Mašek, B.; Kovárík, T.
in: 6. Kovárenská konference Nové technologie kování, s. 17, ISBN 978-80-239-8938-0, 2007

112) Application of New Microscopic Methods for Analyses of Multiphase Steels
Staňková, H.; Skálová, L.; Mašek, B.
in: 8th Multinational Congress on Microscopy, s. 201, Prague, June 2007, ISBN 978-80-239-9397-4

113) Possible Application of Laser Scanning Confocal Microscopy in Material Science
Skálová, L.; Staňková, H.; Mašek, B.
in: 8th Multinational Congress on Microscopy, s. 199, Prague, June 2007, ISBN 978-80-239-9397-4

114) Physical modelling of microstructure development during technological processes with intensive incremental deformation
Mašek, B.; Staňková, H.; Malina, J.; Skálová, L.; Meyer, L. W.
in: Key Engineering Materials Vols. 345-346 (2007) pp. 943-946, 2007, ISBN 0-87849-440-5

115) Influence of the chemical composition of 20MoCrS4 and low-alloyed TRIP steel on the intensity of high temperature corrosion
Mašek, B; Staňková, H.; Meyer, L. W.; Krüger, L.
in: Materials and Corrosion 2007, 58, No. 9, s. 704 - 709, ISSN 1521-4176, 2007

116) Influence of the forming conditions on the mechanical properties of the final product, when using the profile rolling process
Malina, J.; Mašek, B.; Staňková, H.
in: International Conference on Structural Analysis of Advanced Materials - ICSAM 2007, s. 37, Recko, 2-6.9 2007

117) Microstructure development in aluminium alloy 5754 and 7075 processed by constrained groove pressing
Kovářík, T.; Mašek, B.; Nový, Z.
in: International Conference on Structural Analysis of Advanced Materials - ICSAM 2007, s. 37, Recko, 2-6.9 2007

118) Modelování a měření deformace v tahokovu
Nový, Z.; Duchek, M.; Dugan, J.; Mentl, V.; Voldrich, J.; Tikal, B.; Mašek, B.
in: FORMING 2007, Podbanské (Slovensko) 12.-15. zárí 2007, ISBN 978-80-227-2702-0

85) The Influence of the Incremental Deformation Intensity on the Microstructure Development
Staňková, H.; Mašek, B.; Meyer L.W.
in: 7th International Conference on Production Engineering and Design for Development, PEDD 7, 7. - 9. 2. 2006, Cairo, Egypt ISBN 12-7340-49-8

86) Structure refinement in TRIP steel by means of intensive incremental deformation for rotary spin extrusion
Mašek, B.; Staňková, H.; Meyer L.W.; Nový, Z.; Klíbr, J.
in: International Conference Asia Steel 06, 9. - 11. 5. 2006, Fukuoka, Japan

87) Trends in the Development and Research of Forming Technologies at the University of West Bohemia in Pilsen

Nové trendy ve vývoji a výzkumu technologií tváření na Západočeské univerzitě v Plzni
Mašek, B.; Bernáek, V.; Staňková, H.; Malina, J.; Fryová, V.
in: International Workshop, Ostrava, 2006, ISBN 80-248-1100-6

88) Influence of thermomechanical treatment of the TRIP steel on the final microstrucure
Mašek, B.; Staňková, H.; Malina, J.; Meyer, L. W.; Nový, Z.
in: 14th International Scientific Conference CO-MA-TECH, Trnava, Slovensko, 2006

89) Microstructure of C-Mn-Si-Nb TRIP steel after thermo-mechanical processing
Skálová, L.; Jandová, D.; Mašek, B.
in: 14th International Scientific Conference CO-MA-TECH, Trnava, Slovensko, 2006

90) Microstructures and mechanical properties of ultrafine grained AlMgSi alloy processed by ECAP and their thermal stability
Kovářík, T.; Zrník, J.; Mašek, B.
in: 4th International Phd Conference on Mechanical Engineering, Plzeň, 2006

91) FEM analysis of the influence of surface roughness on the Stress distribution during rotation-bending test
Malina, J.; Behúlová, M.; Staňková, H.; Maek, B.
in: Lifetime of Materials and Constructions, Brno, 2006

92) Influence of deformation on the final structure with cross rolling process
Malina, J.; Vraič, I..; Staňková, H.; Mašek, B.
in: 14. International Scientific Conference CO-MA-TECH, Trnava, Slovensko, 2006

93) Influence of the amount of reduction on deformation character during reduction cross rolling
Mašek, B.; Malina, J.; Staňková, H.; Meyer, L. W.
in: 8th international conference Forming Technology, Forming Tools and Machines - FORM 2006

94) Distribution of deformation during the reduction cross rolling process
Malina, J.; Staňková, H.; Mašek, B.
in: 4th International PhD Conference on Mechanical Engineering, Plzeň, 2006

95) Verification of the Validity of the Common Phenomenological Models for Low-Alloyed TRIP Steel
Staňková, H.; Motyčka, P.; Meyer, L. W.; Mašek, B.
in: 10th International Research/Expert Conference - Trends in the Development of Machinery and Associated Technology - TMT 2006

96) Microstructure development in TRIP steel after simulated thermomechanical processing
Skálová, L.; Jandová, D.; Maek, B.
in: 10th International Research/Expert Conference - Trends in the Development of Machinery and Associated Technology - TMT 2006

97) Forging Tool for Constrained Groove Pressing
Hlaváč, J.; tádler, C.; Mašek, B.; Fier, P.
in: International conference on Computer Aided Design and Manufacturing CADAM'06, Supetar, Croatia, ISBN 953-7142-19-0, 2006

98) Mpžnosti generování fázové modulace pro řízení měničů typu FULL BRIDGE
Ronešová, A.; Krupka, F.; Mašek, B.
in: Sborník príspevku konference VROV 2006, ISBN 80-214-3247-0, 2006

99) Werkstoffeigenschaften bei der Herstellung und Verarbeitung von Stahlrohren
Diekmann, U.; Meyer L.W., Mašek, B.
in: 9. Werkstofftechnisches Kolloquium, Chemnitz, Germany, ISBN-10 3-00-019101-1, 2006

100) Static and Dynamic Induction Heating Experiment and Numerical Simmulation
Behúlová, M.; Mašek, B.; Meyer, L. W.
in: Materialprüfung Werkstoffe und Bauteile, Technologien und Anwendung, 48. Jahrgang, 5/2006, p. 217-224, ISSN 0025-5300

101) Comparison of the Intensity of High Temperature Surface Damage for 20MoCrS4 Steel with Varying Parameters of Dynamical Heating
Mašek, B.; Staňková H.; Krüger, L.; Meyer L.W.
in: Material Science and Technology, accepted

76) Development of Ultra Fine Microstructures in Carbon Steels
Mašek, B.; Nový, Z.; Drnek, J.; Meyer, L.W.
in: Materials Testing, 47 (2005),No.3, p.147-150, Carl Hanser Verlag, München, ISSN 0025-5300

77) Pouití modelového tvárení pro vývoj technologických procesu volného kování
Mašek, B.; Bernáek, V.; Nový, Z.; Kener, D.; Meyer, L.W.
in: 5.Kovárenská konference SKCR, 24.-24.5. 2005, Nové Mesto na Morave, SKCR, CZ

78) Transformation induced plasticity (TRIP) near forming technologies of carbon C-Mn-Si steel
Klíber, J.; Maek, B.; áček, O.; Staňková, H.
in: Microas 05 - Microalloying for New Steels Processes and Applications, San Sebastian, 7.- 9.9. 2005, E, ISSN 0-87849-981-4

79) Influence of niobium on TMT with incremental deformantions in low-alloyed Mn-Si steel
Vliv niobu na TMT s inkrementálními deformacemi u nízkolegované Mn-Si oceli
Maek, B.; Staňková, H.; Nový, Z.; Malina, J.; Meyer, L.W.
in: 4th International Conference Ther-Tech-Form, Tále 5. - 8. 09. 2005, SK, ISSN 1335-1532

80) Software Visualization of Deformation Fields
Meyer, L.W.; Jirka, T.; Mašek, B.; Halle, T.; Staňková, H.
in: International Research Conference TMT 2005, Antalya, 26. - 30. 9. 2005, TR, ISBN 9958-617-28-5

81) Development of new incremental forming strategies for low-alloyed TRIP steels
Mašek, B.; Staňková, H.; Nový, Z.; Meyer, L.W.
in: 8th International Conference on Technology of Plasticity, ICTP 2005, Verona, 9. - 13. 10. 2005, I, ISBN 88-87331-74-X

82) Influence of thermomechanical treatment on the steel C45 fatigue properties
Malina, J.; Staňková, H.; Drnek, J.; Nový, Z.; Mašek, B.
in: 13the International Scientific Conference CO-MA-TECH 2005, 20.-21. 10. 2005, Trnava, Slovensko, ISBN 80-227-2286-3

83) Thermal analysis of internally cooled spike for the process of rotary spin extrusion
Behúlová, M.; Mašek, B.; Meyer, L.W.
in: 13the International Scientific Conference CO-MA-TECH 2005, 20.-21. 10. 2005, Trnava, Slovensko, ISBN 80-227-2286-3

84) High temperature corrosion of 20MoCrS4 and Mn-Si TRIP steels
Staňková, H.; Meyer, L.W.; Krüger, L.; Mašek, B.
in: 24th Annual Conference Corrosion Problems in Industry, Hurghada, 5.-8. 12. 2005, Egypt

63) Measurement of Planar Fraction of Phases in TRIP Steel by Means of Quantitative Image Analysis

Stanovení ploného podílu fází v TRIP oceli kvantitativní obrazovou analýzou
Diviová, R.; Staňková, H.; Jandová, D.; Mašek, B.
in: Digitální mikroskopie a analýza obrazu v metalografii, ZČU Plzeň, 9.1. 2004, CZ

64) A New Meeting with UFO

Nová setkání s UFO
Mašek, B.
in: Univerzitní noviny, Západočeská univerzita v Plzni, leden 2004, str. 9

65) Using a Non-Standard Visualization Method for Analysis of Rotational Bending Tests
Mašek, B.; Jirka, T.; Staňková, H.; Dalíková K.; Mahn, U.; Meyer. L.W.
in: International Research Conference TMT 2004, Neum, 15.-19.9. 2004, BiH

66) Fatigue Properties Assessment of the Thermomechanically Treated Steel 34CrNiMo6 with the Suport of FEM Simulation
Mašek, B.; Mahn, U.; Dalíková K.; Malina, J.; Staňková, H.; Meyer. L.W.
in: International Research Conference TMT 2004, Neum, 15.-19.9. 2004, BiH

67) A Expansion of TRIP Effect Application in Incremental Deformation Forming
Staňková, H.; Nový, Z.; Dalíková, K.; Meyer, L. W.; Mašek, B.
in: XXIII. Colloquium on Metal Forming, Montanunivesität Leoben, Planneralm, 19.2 - 6.3. 2004, ISBN 3-902078-05-7, A

68) Improving of Fatigue Limit of Steel 20MoCrS4 by Metastabile Austenite Forming
Mašek, B.; Dalíková K.; Staňková, H.; Malina, J.; Meyer. L.W.
in: XXIII. Colloquium on Metal Forming, Montanunivesität Leoben, Planneralm, 19.2 - 6.3. 2004, ISBN 3-902078-05-7, A

69) The Optimization of Thermomechanical Treatment of Multiphase TRIP Steels Using Quantitative Phase Analysis

Optimalizace termomechanického zpracování vícefázové TRIP oceli s pomocí kvantitativního hodnocení fází
Mašek, B.; Staňková, H.; Nový, Z.
in: Internationl Conference FORM 2004, Brno, 21.-22.9.2004, ISBN 80-86607-11-9, CZ

70) Numerical Simulation of Induction Heat Treatment of Hollow Shafts from 20MoCrS4 Steel
Vraic, I.; Behúlová, M.; Mašek, B.; Meyer. L.W.
in: 12. International Conference CO-MAT-TECH 2004, Trnava, 14.-15.10. 2004, ISBN 80-227-2117-4, SK

71) New Non-conventional Methods of Thermomechanical Treatment
Mašek, B.; Meyer. L. W.
in: International Conference on Heat Treatment, Jihlava, 23.-25.11.2004, ISBN 80-239-3561-5, CZ

72) Heat Treatment Optimalization of TRIP Steels

Optimalizace tepelného zpracování TRIP ocelí
Nemecek, S.; Nový, Z.; Staňková, H.; Mašek, B.
in: International Conference on Heat Treatment, Jihlava, 23.-25.11.2004, ISBN 80-239-3561-5, CZ

73) Nový hydraulický lis se sinusoidním pohonem a moností kování s rízenou promenlivou rychlostí deformace
Mašek, B.; Pahnke, M.; Bernáek, V.; Sniegonová B.; Nový, Z.
in: Kovárenství No. 24/2004 p. 24-28

74) Integration of a Thermomechanical Treatment in to the Spin Extrusion Process
Mašek, B.; Neugebauer, R.; Mahn, U.; Meyer, L.W.
in: Stahl und Eisen, 124 No.9, p. 77-82

75) Surface Degradation of a 20MoCrS4 Steel Workpiece by High-Temperature Corrosion
Meyer, L.W.; Staňková, H.; Mašek, B.
in: 23. Annual Conference Corrosion Problems in Industry, Ras Sudr, 6.-9.12. 2004, Egypt

54) Thermomechanical Processing of Vanadium Alloyed Medium-carbon Steel
Zrník, J.; Kvačkaj, T.; Mašek, B.; Meyer, L. W.
in: XXII. Verformungskundliches Kolloquium, Montanuniversität Leoben, Leoben, 3.-6. 2. 2003, A, ISBN 3-902078-03-0

55) The Influence of Thermo-mechanical Processing on the Microstructure of Steel 20MoCrS4
Jandová, D.; Meyer, L. W.; Mašek, B.; Nový, Z.; Kener, D.; Motyčka, P.
in: Material Science and Engineering, A349 (2003), p. 36 - 47

56) Technological Chain of Free Forging of Large Shafts Developed with the Aid of FEM Simulation
Mašek, B.; Nový, Z.; Kener, D.
in: I.C.F.G. Workshop on Process Simulation in Metal Forming Industry, International Cold Forging Group, Royal Institute of Technology, Stockholm, 17.-20.6. 2003, S

57) The Utilisation of Thermomechanical Treatment in Forging Process
Vyuitelnost termomechanického zpracování v kovárenství - 1
Vyuitelnost termomechanického zpracování v kovárenství - 2
Nový, Z.; uchmann, P.; Drnek, J.; Kener, D. ; Kraus, L.; Mašek, B.; Bernáek, V.
in: 4. kovárenská konference, Svaz kováren České Republiky, Brno, 27.-28.5.2003, CZ

58) The Optimisation of the Thermomechanical Treatment with Incremental Deformation for Steels with TRIP Effect
Mašek, B.; Staňková, H.; Dalíková, K.; Nový, Z.
in: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 16, S. 521 - 27, Hanser Verlag München, ISSN 1439-1597

59) Application of Numerical Simulation to Increase the Aspect Ratio and Stability of Specimens for Upsetting Tests
Meyer, L. W.; Mašek, B.; Kener, D.
in: International Research/Expert Conference: Trends in the Development of Machinery and Associated Technology - TMT2003, Lloret de Mar, Barcelona, 15.-16. 9. 2003, E

60) Assessment of the Parameters Influencing the Accuracy of the Numerical Analysis of Induction Heating Process
Behúlová, M.; Mašek, B.; Meyer, L. W.
in: 11. International Conference CO-MAT-TECH 2003, Trnava, 16.-17. 10. 2003, SK

61) A New Press with Hydraulic Sinusoidal Drive Enables Forging with Controlled Variable Strain Rates
Mašek, B.; Pahnke, M.; Bernáek, V.; Sniegonova, B.
in: International Forgemaster Meeting IFM 2003, Kobe, 26. - 29. 10. 2003, Japan

62) Integration of a Thermo-mechanical Treatment into the Spin Extrusion Process
Mašek, B.; Neugebauer, R.; Mahn, U.; Meyer, L. W.
in: Material Science and Technology, 2003

45) A new Testing Machine for Compression-Spin Test
Mašek, B.; Fryová, V.; Koucký, V.
in: International Conference Form 2002, Brno, 16.-18.9. 2002, CZ, ISBN 80-214-2162-2

46) Improving of Mechanical Properties of 38MnSiVS5 Steel by Multiple Deformation
Mašek, B.; Mayer, L.W.; Nový, Z.
in: International Conference PEDD 6, Ain Shams University, Cairo, 12. - 14. 02. 2002, Egypt *)

47) Structural Influence and Modification of 38MnSiVS5 Steel Properties by Thermomechanical Processes
Mayer, L.W.; Kvačkaj, T.; Zrnik, J.; Mašek, B.
in: International Conference Ther-Tech-Form, Tále 23. -25. 04. 2002, SK, ISSN 1335-1532 *)

48) Influence of Controlled Rolling on Properties of Vanadium Alloyed Medium Carbon Steel
Zrník, J.; Kvačkaj, T.; Vrchovinský, V.; Mašek, B.; Meyer, L. W.
in: International Conference Ther-Tech-Form, Tále 23. -25. 04. 2002, SK, ISSN 1335-1532

49) Integration of Thermomechanical Treatment by Spin Extrusion
Integration der thermomechanischen Behandlung im Bohrungsdrückprozess
Mahn, U.; Mašek, B.; Meyer, L. W.; Neugebauer, R.
in: Wissenschaftliches Kolloquium, "Prozessketten der Massivumformung unter Aspekten der Produktivität und Umweltverträglichkeit", Chemnitz, 27.9. 2002, D *)

50) A New Forging Press with Hydraulic Sinusoidal Drive
Mašek, B.; Bernášek, V.; Huek J.; Pahnke, M.
in: International Congress ICTP 2002, Yokohama, 27.10. - 01. 11. 2002, Japan *)

51) Modelling of Technological Forming Processes Using Torsion Plastometry
Modelování technologických řetězců tváření za pomoci torzní plastometrie
Bořuta, J.; Meyer, L. W.; Mašek, B.; Kubina, T.
in: Conference Forming 2002, Luhačovice, 18.- 20. 9. 2002, CZ, ISBN 83-910722-6-6

52) The Laboratories and Modelling Forming Processes at West Bohemia University
Laboratoře a modelování tvářecích procesů na Západočeské univerzitě
Mašek, B.; Bernášek, V.
in: Kovárenství No. 21, p.37, 12/2002

53) Two New Tribological Tests for the Metal Forming
Zwei neue tribologische Tests für die Metallumformung
Hartwig, H.; Mašek, B.
in: Tribologie und Schmierungstechnik 49 (2002)6, S. 10-14

37) Extrusion of Special High Nickel Alloyed Tubes
Strangpressen von Rohren aus hochnickellegiertem Sonderwekstoff
Nový, Z.; Hosnedl, P.; Kener, D.; Mašek, B.
in: MEFORM 2001, IFM TU-BA Freiberg, 2001, S. 229 - 237, D, ISBN 3-86012-141-3 *)

38) Utilisation of FEM Simulations by the Development of Technological Chains of Free Forging
Einsatz der FEM-Simulation zur Entwicklung von Prozessketten beim Freiformschmieden
Mašek, B.
in: The 8th Saxon Conference on Forming Technology, Freiberg, 5.12. 2001, D, ISBN 3-86012-158-8 *)

39) Optimisation of Properties by the Aimed TMT Integrated in Bulk Forming Technological Chains
Eigenschaftsoptimierung durch gezielte TMB, integriert in eine Massivumformprozesskette
Mayer, L.; Mašek, B.
in: The 8th Saxon Conference on Forming Technology, Freiberg, 5.12. 2001, D, ISBN 3-86012-158-8

40) Thermomechanical Concepts of Structure Transformation
Thermomechanische Konzepte zur Gefügeänderung
Mayer, L.; Mašek, B.
in: 4. Industriefachtagung Oberflächen- und Wärmebehandlungstechnik, Chemnitz, 20.- 21. 10. 2001, D, ISBN 3-89653-891-8

41) Monitoring of Thermomechanically Processed Material by X-Ray Difraction
Mayer, L.; Fiala, J.; Nový, Z.; Wollmann, M.; Mašek, B.
in: 9. International Conference CO-MAT-TECH 2001, Trnava, 2001, SK, ISBN 80-227-1591-1 *)

42) Two New Tribological Tests for Metal Forming
Hartwig, H.; Mašek, B.
in: World Tribology Congress, 03.-07.09. 2001, Wien, 2001, A, ISBN 3-901657-09-6

43) Modelling of Forming Processes - New Possibilities of Laboratory Forming
Modelování tvářecích procesů - nové možnosti laboratorního tváření
Modellierung der Umformprozesse -neue Möglichkeiten der Modellformgebung
Mašek, B.; Bernášek, V.; Nový, Z.
in: 2. Česká národní kovářská konference, Žďár nad Sázavou, 29. - 30. 5. 2001, CZ *)

44) Thermomechanical Concepts of Structure Transformation
Thermomechanische Konzepte zur Gefügeänderung
Mašek, B.; Mayer, L.
in: Schriftenreihe Werkstoffe und Werkstofftechnische Anwendungen, M Verlag Meinz, Band 7/2001, S. 315 - 320, D, ISSN 1439-1597

29) 3D Simulation des Stauchens und Reckens des I 45 Ingotes

3D Simulations of Upsetting and Elongation of 45 MT Ingots
Mašek, B.; Nový, Z.; Kener,D.
8th International Metallurgical Conference Metal 2000, Ostrava, CZ *)

30) Computer Simulation of Technological Chain by Free Forging
Mašek, B.; Nový, Z.; Kener,D.
in: 14th International Forgemasters Meeting IFM 2000, Wiesbaden, D *)

31) Hot Rolling of Mo and Cr High Alloyed Nickel Materials

Warmwalzen von Blechen aus Mo und Cr hochlegierten Nickelwerkstoffen
Nový, Z.; Hosnedl, P.; Lehmann, G.; Mašek, B.
in: Conference MEFORM 2000 Freiberg 2000, D *)

32) Utilisation of Deformation Dilatometry by Development of Technological Forming Processes

Einsatz der Umformdilatometrie zur Entwicklung technologischer Prozesse des Umformens
Meyer, L. W.; Mašek, B.
in: Seminář metalurgů a technologů kováren, Valasské Klobouky, 2000, CZ *

33) Thermomechanical Processing of 34CrNiMo6 Steel
Nový, Z.; Džugan, J.; Jandová, D.; Mašek, B.; Meyer, L.- W.
in: 4th International Symposium of Croatian Metallurgists SHM 2000, Opatia, Croatia

24) Development of Structure and Material Properties during Incremental Deformation

Using of IRC Sensor to Force Dependence Measuring in Plastometry
Koucký, V.; Mašek, B.; Rone, V.
in: Conference Applied Electronics 2000, KAE FEL, 2000, ZČU Plzeň, CZ

35) Hydraulic Sinusoidal Drive of CKW 6000 Forging Press Model

Kovací lis CKW 6000 s hydraulickým sinusovým pohonem
Mašek, B.; Bernáek, V.; Jáchym, V.; Havelka, L.
in: International Conference FORM 2000, BVV Brno, CZ *)

36) FEM Simulation of One-Piece Crankshaft Production
Mašek, B.; Nový, Z.; Kener,D.; Meyer L.W.
in: International Conference CO-MAT-TECH 2000, Trnava 2000, SK, *)

24) Comparison of Computer Simulation Results and the Experiment for the Ring - Compression - Test
Mašek, B.; Hartwig, H.
in: International Conference THER TECH FORM ´99, Tále 1999, SK *)

25) Forge 3 - Possibilities of Close Die Forging in Example

Forge 3 - Möglichkeiten am Beispiel eines Gesenkschmiedestückes
Mašek, B.; Kener, D.; Nový, Z.
in: Conference MEFORM 99 Freiberg 1999, D *)

26) Possibilities of FEM-simulation by Large Crankshaft Production
Mašek, B.; Nový, Z.; Kener, D.
in: International Conference ICTP 99, Nurmberg 1999, D *)

27) Influence of Controlled Thermomechanical Processing Utilising Hot and Warm Forming on 20MoCrS4 Steel Properties
Mašek, B.; Meyer, L.-W.; Nový, Z.; Kener, D.
in: International Conference CO-MAT-TECH 99, Trnava 1999, SK *)

28) Development of Structure and Material Properties during Incremental Deformation

Gefüge- und Eigenschaftsentwicklung bei der partiellen Umformung
Meyer, L.-W.; Weise, A.; Mašek, B.; Hahn, F.
Wissenschaftliches Koloquium "Prozeßketten bei Masivumformung", SFB 283, TU Chemnitz, 1999, D

20) FEM Analysis of Material Flow in Lower Part of Ingot during Upsetting
FAnalyse des Werkstoffflusses im unteren Teil des Ingottes während des Stauchprozesses mit Hilfe der FEM
Analýza materiálového toku v patní oblasti ingotu při pěchovacích operacích pomocí metody konečných prvků
Mašek, B.; Kener, D.
in: International Metallurgical Symposium Metal 98, Tanger, Ostrava, CZ, 1998 *)

21) Utilisation of Computer Simulation for Suitable Lay-out of Upsetting Matrix Geometry for 45 MT Ingot
Einsatz der Computersimulation zum Entwurf einer Stauchmatrix-Geometrie für einen 45 -Tonnen-Ingot
Využití počítačové simulace pro návrh vhodné geometrie matrice k pěchování ingotu o hm otnosti 45 tun
Mašek, B.; Kener, D.
in: International Conference CO MA TECH 98, Trnava, SK, 1998 *)

22) Modelling of Heat Treatment of Steel 16343
Modellierung der Wärmebehandlung des Stahles 34CrNiMo6
Modelování tepelného zpracování oceli 16343
Nový,Z.; Mašek, B.; Poláková, I.; Jandová, D.
in: International Conference CO MA TECH 98, Trnava, SK, 1998 *)

13) Influence of Macrostructure on Formability of Alloy FeNi42

Einfluss des Makrogefüges auf das Umformverhalten der Legierung FeNi 42
Mašek, B.
in: Sächsische Fachtagung Umformtechnik, in Tagungsband Freiberg, 1998, D *)

17) FEM Analysis of Material Flow in Lower Part of Ingot during Upsetting
FEM Analyse des Werkstoffflusses im unteren Teil des Ingottes während des Stauchprozesses
Analýza materiálového toku v patní oblasti ingotu při pěchovacích operacích pomocí metody konečných prvků
Pávek, L.; Džugan, J.; Mašek, B.
in: Seminář metalurgů a technologů kováren s mezinárodní účastí, Dolní Čermná, CZ, 1997 *)

18) Experimental Modelling and FEM Simulations of Various Types of Cold Deformations of Steel P900
Experimentelle Modellierung und FEM -Simulation bei der Kaltumformung des Stahles P900 unter verschiedenen Spannungszuständen
Experimentální modelování a MKP simulace různých typů deformace zastudena na oceli P900
Nový, Z.; Džugan, J.; Jandová, D.; Mašek, B.; Kaiser, J.
in: Seminář metalurgů a technologů kováren s mezinárodní účastí, Dolní Čermná, CZ, 1997 *)

19) Influence of Macrostructure on Formability of Alloy FeNi42
Einfluss der Makrostruktur auf das Umformvermögen der Legierung FeNi42
Přispěvek k vlivu makrostruktury na tvařitelnost slitiny FeNi42
Mašek, B.
in: První národní kovárenská konference, Hradec nad Moravicí, CZ, 1997 *)

15) Utilisation of Computer Simulation of Casting Solidification for Suggestion of Technology of Sliding Block Processing
Einsatz der Computersimulation der Erstarrung des Gussstückes für den Entwurf der Herstellungstechnologie eines Gleitelementes
Využití počítačové simulace tuhnutí odlitku pro návrh technologie výroby smykadla
Mašek, B.; Bernášek, V.; Kovařík, J.
in: IV. International Metallurgical Symposium, Rajecké Teplice, SK, 1996 *)

16) Formability of Material ALZEN 305 by Hot Forming
Warmumformbarkeit des Werkstoffes ALZEN 305
Tvařitelnost materiálu ALZEN 305 za tepla
Pfrogner, F.; Bernášek, V.; Mašek, B.
in: IV. International Metallurgical Symposium, Rajecké Teplice, SK, 1996 *)

4) From Metallurgical Laboratories: System of Image Analysis for Metallography
Aus Hüttenlabors: Bildanalysesystem für Metallographie
Z hutních laboratoří - Systém obrazové analýzy pro metalografii
Petr, E.; Mašek, B.
in: Hüttenblatt, No.4 1995, p. 29 - 31; D

5) Mechanism of Hardening of Steel P900 During Cold Forming
Mechanismus der Verfestigung des Stahls P 900 bei Kaltumformung
Mechanismus zpevňování oceli P 900 při tváření za studena
Nový, Z.; Mašek, B.
in: Seminář metalurgů a technologů kováren s mezinárodní účastí, Plzeň, CZ, 1995

6) Monitoring of Plasticity Test on Torsion Plastometer
Monitorring des Plastizitätsversuches auf dem Torsionsplastometer
Monitorování zkouky plasticity na zkrutovém plastometru
Koucký, V.; Basl, J.; Mašek, B.
in: Seminář metalurgů a technologů kováren s mezinárodní účastí, Plzeň, CZ, 1995 *)

7) Program Control of Laboratory Furnaces
Sparsame Programmsteuerung der Laboröfen
Úsporné programové řízení laboratorních pecí
Koucký, V.; Mašek, B.; Jirouch, T.
in: Seminář metalurgů a technologů kováren s mezinárodní účastí, Plzeň, CZ, 1995 *)

8) Metallurgical Influence of Formability of Alloy FeNi 42 during Hot Forming
Metallurgische Beeinflussung der Warmverformungsfähigkeit der Legierung FeNi 42
Metalurgické ovlivnění tvařitelnosti slitiny FeNi 42 za tepla
Mašek, B.
in: 4. International Symposium Metal 95/IV, Ostrava, CZ, 1995 *)

9) Utilisation of Technological Waste for Production of Alloy FeNi 42 with Higher Purity
Einsatz technologischer Abfälle für die Herstellung der Legierung FeNi 42 mit erhöhtem Reinheitsgrad
Využití technologických odpadů pro výrobu slitiny FeNi 42 se zvýenou čistotou
Mašek, B.
in: 4. International Symposium Metal 95/II, Ostrava, CZ, 1995 *)

10) Computer Evaluation of Material Structure in Třinecké železárny Co. Třinec
Computerauswertung der Werkstoffstruktur im Unternehmen Třinecké železárny AG Třinec
Počítačové vyhodnocení struktury materiálu v Třineckých železárnách a.s. Třinec
Mašek, B.; Nový, Z.
in: International Symposium Applied Electron ics, Plzeň, CZ, 1995 *)

11) Reconstruction of Electrical Evaluation Part of Formability Test Device
Umbau des Auswertungmoduls der Anlage für die Untersuchung der Umformungsfähigkeit unter Torsion
Rekonstrukce elektrické vyhodnocovací části zařízení pro zkouení tvařitelnosti krutem
Koucký, V.; Bask, J.; Mašek, B.
in: International Symposium Applied Electronics, Plzeň, CZ, 1995 *)

12) Comparison of Experimental Results of Mould Solidification of Alloy Zn60Al35Cu5 to Simulation by the help of Program "Simulor"
Vergleich der experimentellen Ergebnisse der Erstarrung der Legierung Zn60Al35Cu5 in der Kokille und Berechnungssimulation mit Hilfe des Programms "Simulor"
Srovnání experimentálních výsledků tuhnutí slitiny Zn60Al35Cu5 v kokile s výpočtovou simulací pomocí programu "Simulor"
Mašek, B.; Beránek, V.; Kovařík, J.; Luňáček, K.
in: Conference with International Participation, Bratislava, SK, 1995 *)

13) Verification of Plastic Features of Alloy Zn60Al35Cu5
Ermittlung der plastischen Eigenschaften der Legierung Zn60Al35Cu5 im Warmzustand
Ověření plastických vlastností slitiny Zn60Al35Cu5 za tepla
Bernášek, V.; Mašek, B.
in: Conference with International Participation, Bratislava, SK, 1995 *)

14) New Knowledge of Forming of Alloy ZnAl
Neue Erkenntnisse bei der Umformung von ZnAl-Legierungen
Pfrogner, F.; Bernášek, V.; Mašek, B.
in: 2. Sächsische Fachtagung Umformtechnik "Progressive Werkstoffumformung", Tagungsband II. Freiberg 1995, D

3) FeNi 42 - Alloy with Higher Metallurgical Purity
Legierung FeNi 42 mit erhöhtem metallurgischen Reinheitsgrad
FeNi 42 - slitina se zvýšenou metalurgickou čistotou
Mašek, B.
in: 1. International Symposium, Inovace 94, Praha, CZ, 1994 *)

2) Zn60Al35Cu5 - Alloy for Plain Bearings
Legierung Zn60Al35Cu5 für Gleitlagerung
Zn60Al35Cu5 - slitina pro kluzná uložení
Mašek, B.
in: 1. International Symposium, Inovace 94, Praha, CZ, 1994 *)

1) Ordio M - Systems of Quantitative Structures Analysis in Optical Metallography
Ordio M - Systeme für quantitative Auswertung der Gefüge in der optischen Metallographie
Ordio M - Systémy pro kvantitativní hodnocení struktur v optické metalografii
Hroch, M.; Mašek, B.; Nový, Z.
Conmet bulletin 1/93 and Symposium Conmet 92, MSV in Brno, CZ, 1992

Tabs